The technology of 5 simultaneous axes multiplies the measuring speed of your three-dimensional machine by 3. This is possible thanks to the head PH20 of Renishaw along with the software TouchDMIS that promote a easy and intuitive programming.
In addition to the 3 translation axes of coordinate measuring machines, 2 rotation axes can be added to the head. These two additional axes can be used only to orient the probe, as in the case of the PH10 head. Or, however, to obtain the measurement points, which is the capacity provided by the PH20 head.
Clearly, the big advantage of using 5 axes is the speed increase by eliminating the inertia of the probing process. Thanks to the 2 additional axes provided by the PH20 head, only the head with the probe and feeler moves, thus leaving the machine gantry completely static.
This reduction in inertia favors the precision of the movements. Next the comparison between using a PH10 or a PH20 on the same three-dimensional machine:
In addition, 5-axis movements save time spent indexing the head. This combined speed generally produces a increased production up to three times higher than in conventional systems. Also Decreases calibration time, since the PH20 system determines the head orientation and the probe position in a single operation. This allows subsequent measurements to be made at any angle of the head. Another great advantage to highlight is the ability to position the PH20 head at any tilt angle instead of every 7.5º to which the PH10 is limited.
However, not all three-dimensional measuring machines are prepared for this technology. Since Teciman We can do the retrofit or update suitable for incorporating the 5 axes into your machine with total guarantee. Our machines COORD3 They come Series ready to incorporate 5-axis measurement and with the added advantage of software TouchDMIS. Which fully supports this type of head and technology, with simple programming and magnificent results.